802.11n Wi-Fi in Computer Networking

Each networking standard is faster than the one before it

802.11n is an IEEE (Institute of Electrical and Electronics Engineers) industry standard for local Wi-Fi network communications, ratified in 2009. It replaced older 802.11a, 802.11b, and 802.11g Wi-Fi technologies but was superseded by the 802.11ac in 2013 and 802.11ax (Wi-Fi 6) in 2019. 802.11ay (Wi-Fi 7) is up next.

Each standard is faster and more reliable than the one that came before it and is generally backward-compatible.

The Wi-Fi Alliance refers to the various technologies by a simplified Wi-Fi version number. In this scheme, 802.11n is known as Wi-Fi 4.

The packaging of any Wi-Fi device you purchase reflects which of these standards the device supports.

Wi-Fi logo

Key Wireless Technologies in 802.11n

802.11n uses multiple wireless antennas in tandem to transmit and receive data. The associated term MIMO (multiple input, multiple output) refers to the ability of 802.11n and similar technologies to coordinate multiple simultaneous radio signals. 802.11n supports up to four simultaneous streams. MIMO increases both the range and throughput of a wireless network.

An additional technique employed by 802.11n involves increasing the channel bandwidth. As in 802.11a/b/g networking, each 802.11n device uses a preset Wi-Fi channel on which to transmit. The 802.11n standard uses a broader frequency range than the earlier standards, which increases data throughput.

802.11n Performance

802.11n connections support maximum theoretical network bandwidth up to 300 Mbps, depending primarily on the number of wireless radios in the devices. 802.11n devices operate in both the 2.4 GHz and 5 GHz bands.

802.11n vs. Pre-n Network Equipment

In the last few years before 802.11n was officially ratified, network equipment manufacturers sold pre-N or draft N devices based on preliminary drafts of the standard. This hardware is generally compatible with current 802.11n gear, although older devices might require firmware upgrades.

The Successors to 802.11n

802.11n served as the fastest Wi-Fi standard for five years before the 802.11ac (Wi-Fi 5) protocol was approved in 2014. 802.11ac offers speeds ranging from 433 Mbps up to several gigabits per second, which approaches the speed and performance of wired connections. It functions in the 5 MHz band and supports up to eight simultaneous streams.

As mentioned in the introduction, 802.11ax (Wi-Fi 6) is the latest standard, introduced in 2019.

FAQ
  • What is the theoretical range of 802.11n?

    In an open space, 802.11n supports a range of a little over 200 feet. Building materials and other physical obstructions can limit the signal range indoors.

  • What is the maximum theoretical throughput of 802.11n?

    802.11n can theoretically support a maximum throughput of 600 Mbps. However, that's only if your router is optimized to transmit data across multiple channels simultaneously.

  • What is Ad hoc 11n?

    Ad hoc 11n is a setting that allows a device to connect to an ad hoc network using the 802.11n standard. Enabling this setting will result in a faster connection when using an ad hoc network.

Was this page helpful?